
Poinciana Cabinet Refacing
Cabinet Refacing in Poinciana, FL
Cabinet Refacing in Poinciana, FL for kitchens, vanities, and islands. New doors, veneer, and hardware. Free estimates, honest box assessments.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Poinciana and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Kitchen cabinet refacing near me in Poinciana
Is your kitchen stuck somewhere between "fine for now" and "I can't look at this oak another year"? Poinciana Cabinet Refacing handles the in-between: new doors, veneer, and hardware over cabinet boxes that are still structurally sound, so you skip the cost and mess of a full gut remodel.
Poinciana spans both Osceola and Polk counties, and the housing stock shows it. Some blocks still have original wood boxes from decades ago. Others have newer builder-grade oak barely a few years old. Box condition varies enough that we check every job in person before quoting a number, instead of pricing blind over the phone. We also run service out to Campbell, Kissimmee, Celebration, and Loughman.

What we do
Cabinet Refacing services
Cabinet Refacing across Poinciana and the surrounding area.
Residential Services

Cabinet Refacing
Cabinet Refacing in Poinciana, box veneer, new doors, matched hardware, free in-home estimates.
Learn more →
Kitchen Cabinet Refacing
Kitchen cabinet refacing in Poinciana, FL updates dated oak or worn boxes with new doors and veneer. Free estimates, same-crew install.
Learn more →
Bathroom Vanity Refacing
Bathroom vanity refacing in Poinciana, FL fixes swollen particleboard and dated doors with moisture-resistant materials. Free estimates.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Poinciana, FL swaps dated or damaged doors matched to your existing boxes. Free estimates, faster than a full reface.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Poinciana, FL updates color and finish on existing doors without sanding or stripping. Free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Poinciana, FL are made to spec for non-standard sizes and traditional or modern profiles. Free estimates.
Learn more →
Kitchen Island Refacing
Kitchen Island Refacing in Poinciana, FL matches your island to new cabinet doors, veneer, and hardware with a free in-home estimate.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil & Laminate Peeling Repair in Poinciana, FL fixes lifted edges and bubbling cabinet surfaces with a free estimate and local scheduling.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Poinciana Cabinet Refacing
We check the boxes before we quote anything
Every estimate starts with an honest look at your existing cabinet boxes, not a guess from a brochure.
Doors matched to what you already have
New fronts and veneer are matched to your box style and finish, so corners and seams line up clean.
Materials picked for Florida humidity
We steer away from finishes known to bubble or lift in humid kitchens and bathrooms.
You talk to the crew, not a call center
Questions about your job go straight to the people doing the work.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist visits your home to check the cabinet boxes and talk through style goals.
Step 2Measurement & Design
We take precise measurements to plan door sizes, finishes, and any layout tweaks.
Step 3Material Selection
You pick from veneer, finish, and hardware samples before anything gets ordered.
Step 4Surface Preparation
Boxes get cleaned, sanded, and repaired so the new surface bonds cleanly.
Step 5Refacing Installation
New veneer, doors, and panels go on and get fitted to your existing cabinet frames.
Step 6Final Walkthrough
We check alignment, finish quality, and hardware function before calling the job done.
Ready to start?
Get a Free EstimateCost
Cabinet Refacing Poinciana FL: what does it cost?
Box count, door material, and hardware choices move the price more than anything else. These are rough ranges, not a quote: Get a firm number with a free estimate tied to your actual kitchen, not these general ranges.
| Project type | Typical range | What’s included |
|---|---|---|
| Hardware-only upgrades | $400–$1,500 | soft-close hinges, drawer slides, and new pulls. |
| Door and drawer front replacement | $2,500–$6,000 | new fronts on sound existing boxes. |
| Full kitchen refacing | $5,000–$12,000 | box veneer plus new doors, drawer fronts, and hardware. |
| Full kitchen refacing with premium wood doors | $9,000–$18,000 | solid wood fronts and upgraded finish work. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and methods we use

Wood Veneer Sheets
Thin wood veneer goes over existing boxes for a refreshed, natural look. It's a common pick across Poinciana's mixed-age housing stock.

Laminate Finishes
Laminate holds up well against kitchen humidity and wipes clean fast, a practical, budget-friendly surface.

Solid Wood Doors
New solid wood doors swap in for old fronts, adding durability that fits both older and newer boxes.

Cabinet Hardware
Knobs, pulls, and hinges get matched to whatever new style you land on.

Soft-Close Hinges
Upgraded hinges give every door a quiet, smooth close instead of a slam.

Protective Topcoat
A clear sealant layer guards finished surfaces against moisture and daily wear, which matters in a climate that sees plenty of both.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
A typical kitchen job unfolds over a short window once materials are in hand. A vanity moves faster since there's less surface area to cover.
- 01
Assessment
same day - 02
Door and material fabrication
1–2 weeks - 03
Box prep and install
1–5 days - 04
Final walkthrough
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance
Always verify specifics with your local Osceola or Polk county building department before work starts.
| Typically needs a permit | Often no permit |
|---|---|
| Work that adds or moves plumbing lines | Door and drawer front swaps |
| Work that touches electrical wiring near cabinets | Veneer applied over existing boxes |
| Structural removal of cabinet boxes or walls | Hardware upgrades |
| — | including soft-close hinges |
| — | Cosmetic refinishing or painting |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
| DIY | Hire a pro |
|---|---|
| ### DIY - Fine for swapping a handful of knobs or pulls - Workable for a single door <!-- rover-autofix-links --> - [About](/about) - [Poinciana](/locations/poinciana) | — |
Not sure DIY vs pro?
Get a Free EstimateWhere we work
Serving Poinciana and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Grenelefe · Davenport · Haines City · Lake Hamilton · Dundee · Buenaventura Lakes · Hunters Creek · Four Corners · Southchase · Meadow Woods · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say
Ashley J.
4 weeks ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for hardware upgrades. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Poinciana, FL

Brian R.
1 week ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the budget door replacement turned out better than I pictured.
Solivita, FL

Susan F.
3 days ago
5 out of 5 starsCalled Poinciana Cabinet Refacing after a neighbor tip in Poinciana. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our cabinet refacing.
Cypresswood, FL
Common questions
Cabinet Refacing FAQs
What kitchen cabinet colors will look outdated in 2026?
Heavy orange-toned oak stains and glossy two-tone combos from the 2010s are the ones we see homeowners want gone first. Warm whites, soft greens, and matte finishes are holding up better long term.
What is the average cost of refacing cabinets?
Industry ranges generally run a few thousand dollars for a small kitchen up to the low five figures for a large kitchen with premium doors. Box count and door material move that number more than anything else.
Is cabinet refacing worth the money?
If your boxes are square and solid, yes. You get a new look for a fraction of a full remodel's cost and without tearing out counters or flooring.
How much does Cabinet Refacing cost in Poinciana?
It depends on how many boxes you have and what door material you pick. See the cost section below for tier ranges, then request a free estimate for a number tied to your actual kitchen.
How long does Cabinet Refacing take?
Most kitchens run about a week once materials arrive. Door fabrication lead time is usually the longest part, not the install itself.
Do I need a permit for Cabinet Refacing?
Typically no, since refacing doesn't touch plumbing, electrical, or structural walls. Projects that add new plumbing runs or move walls are a different story.
Is DIY Cabinet Refacing a good idea?
For a single drawer front, sure. For a whole kitchen, box alignment and seam sealing get tricky fast, and Florida humidity is not forgiving of a bad seam.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Poinciana.
