Poinciana Cabinet Refacing logoPoinciana Cabinet RefacingPoinciana, FL
Menu
crown molding addition in Poinciana, FL

Poinciana Cabinet Refacing

Crown Molding Addition in Poinciana, FL

Crown molding addition in Poinciana, FL finishes refaced or existing cabinets with a custom-fit top profile. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Poinciana and nearby communities.

Crown molding addition caps cabinet runs that stop short of the ceiling, giving a finished, built-in look instead of a visible gap collecting dust above the boxes. It's a common add-on after a reface, or a stand-alone upgrade if your doors and boxes are already in good shape.

Poinciana Cabinet Refacing measures each run and fits molding to match the existing or new door finish, cutting corners to the actual angles in your kitchen rather than relying on pre-mitered stock pieces.

What's included

What's included with Crown Molding Addition

Typically included: measuring cabinet tops, molding profile selection, cutting and fitting to wall and ceiling angles, attachment, and finish matching to existing cabinet color.

Optional: lighted valance add-ons, extra-wide stacked profiles, staining or painting the molding a contrasting accent color.

Customer prep: clear countertops below the work area and confirm whether a bulkhead or soffit is already in place above the cabinets.

How it works

How our Crown Molding Addition process works

  1. Space Measurement photo
    Step 1

    Space Measurement

    Cabinet tops are measured to determine molding length and angles needed.

  2. Molding Style Selection photo
    Step 2

    Molding Style Selection

    Clients choose molding profiles that complement their cabinet design.

  3. Cutting and Fitting photo
    Step 3

    Cutting and Fitting

    Molding pieces are cut to precise angles for proper corner fitting.

  4. Surface Preparation photo
    Step 4

    Surface Preparation

    Cabinet tops are prepared to ensure secure molding attachment.

  5. Molding Installation photo
    Step 5

    Molding Installation

    Molding is attached and secured along the tops of cabinet runs.

  6. Finish Touch-Ups photo
    Step 6

    Finish Touch-Ups

    Seams and edges are finished to blend molding with existing cabinetry.

Materials

Materials and methods for Crown Molding Addition

Molding choice depends on cabinet style and the finish already on your doors. Each of these holds up well in a kitchen with normal grease and humidity exposure once sealed properly.

  • Crown Molding Profiles photo

    Crown Molding Profiles

    A range of molding profiles add decorative detail above cabinetry and can be scaled to match a traditional or simpler kitchen look.

  • Wood Molding Strips photo

    Wood Molding Strips

    Solid wood strips provide a traditional, durable molding option that takes stain or paint evenly.

  • Molding Adhesive photo

    Molding Adhesive

    Strong adhesive secures molding firmly to cabinet surfaces so it doesn't pull loose over time.

  • Finish Nails photo

    Finish Nails

    Finish nails provide additional support for molding installation, especially on longer runs.

  • Matching Stain or Paint photo

    Matching Stain or Paint

    Finish is matched to existing cabinetry for a cohesive appearance instead of a mismatched topper.

  • Corner Molding Blocks photo

    Corner Molding Blocks

    Corner blocks simplify fitting at complex cabinet angles, like corner cabinets or soffit returns.

Cost

What does crown molding addition cost in Poinciana?

Cost depends mostly on linear footage and how detailed the profile is, not square footage of the kitchen. Request a free estimate and we'll measure your actual cabinet runs before quoting a number.

Project typeTypical rangeWhat’s included
Simple profile, single run$300–$800basic molding across one straight cabinet section.
Full kitchen perimeter$800–$2,200molding across upper cabinets around the whole kitchen.
Decorative or stacked profiles$1,200–$3,000+multi-piece or wider architectural profiles with corner detailing.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Timeline

How long does crown molding addition take?

  1. 01

    Consult and measure

    same day
  2. 02

    Molding selection and ordering

    2–5 days

    if a specific profile needs to be sourced.

  3. 03

    Cutting and install

    1 day

    for most kitchens.

  4. 04

    Finish touch-up and cure

    a few hours if paint or stain touch-up is needed on site.

Need a schedule that fits?

Get a Free Estimate

When to call

When to call for Crown Molding Addition

Call (863) 300-0730 or request a free estimate to get molding measured and matched to your kitchen.

  • Your cabinets stop short of the ceiling and the gap collects dust or looks unfinished.
  • You're already having doors refaced or repainted and want a finished cap on top.
  • You're preparing a kitchen for sale and want a more built-in, custom look without replacing cabinets.

Before & after

Before and after Crown Molding Addition

  • crown molding addition in Poinciana, FL
    Before
  • crown molding addition in Poinciana, FL
    After

DIY vs pro

DIY vs hiring a pro for Crown Molding Addition

DIYHire a pro
Fine for a single short straight run with simple square corners and basic tools.Kitchens rarely have perfectly square walls or ceilings, so corner angles often aren't the standard 45 degrees.
Pre-primed stock molding from a hardware store can work for small, low-visibility sections.A pro cuts and test-fits angles on site rather than guessing from a tape measure number.
Requires a miter saw, steady hand, and patience for corner cuts.Matching stain or paint sheen to existing cabinet finish is easy to get wrong without experience.

FAQs

Crown Molding Addition FAQs

Is crown molding worth adding to existing cabinets?

For most kitchens it's a relatively low-cost way to get a custom, built-in look without replacing cabinets, especially before a refacing job or a home sale.

Can molding be added without refacing the whole kitchen?

Molding addition can be done on existing cabinets as a stand-alone job if the doors and boxes are already in good condition.

Will the molding match my current cabinet color?

We match stain or paint finish to your existing cabinets as closely as possible, or you can choose a contrasting accent color.

Does crown molding need a permit?

This is a cosmetic trim addition and does not typically require a permit.

How long does the finish take to cure after installation?

Paint or stain touch-up on the molding typically dries to the touch within a few hours, with full cure over a day or two.

What if my cabinets already have a soffit above them?

We can still add molding below the soffit line, or in some cases remove a partial soffit to create a cleaner ceiling-height run, which we'll discuss during the estimate.

Ask about Crown Molding Addition

Tell us about the project and how to reach you.

Call (863) 300-0730